Spline paste


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
User avatar
Chewy
Posts: 172
Joined: Thu Apr 18, 2019 11:07 pm
Location: Readyville, TN United States
Motorcycle: 1980 1100i Interstate

Spline paste

Post by Chewy »



https://www.amazon.com/Corning-Molykote ... B00B3UUFR4

I ordered this from Amazon, but the label on the jar says molykote 111. Can this still be used for the splines on my '80 wing? I was not able to find an MSDS to find the concentration of molybdenum disulfide in the paste. It is a clear silicone paste. Thank y'all.


User avatar
M61A1MECH
Posts: 128
Joined: Sat Jul 12, 2014 9:38 pm
Location: Edgewater, Florida
Motorcycle: 2013 Goldwing

Re: Spline paste

Post by M61A1MECH »

Here are two links to the MSDS , some now call them SDS, they should help.

http://products.petrochoice.com/system/ ... 1436283334

http://www.findmymsds.com/nissan/pdfs/99998-00M77-E.pdf
Steve K
Edgewater, FL

And the Lord said. "Thou shalt have dominion over all of the animals, except of course the cat."
User avatar
WingAdmin
Site Admin
Posts: 21687
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer

Re: Spline paste

Post by WingAdmin »

Chewy wrote: Thu Jul 23, 2020 9:44 pm https://www.amazon.com/Corning-Molykote ... B00B3UUFR4

I ordered this from Amazon, but the label on the jar says molykote 111. Can this still be used for the splines on my '80 wing? I was not able to find an MSDS to find the concentration of molybdenum disulfide in the paste. It is a clear silicone paste. Thank y'all.
Honda specifies minimum 60% moly content. The MSDS for that product says it is between 63% and 71%, so it should be fine.
User avatar
Chewy
Posts: 172
Joined: Thu Apr 18, 2019 11:07 pm
Location: Readyville, TN United States
Motorcycle: 1980 1100i Interstate

Re: Spline paste

Post by Chewy »

WingAdmin wrote: Fri Jul 24, 2020 9:37 am
Honda specifies minimum 60% moly content. The MSDS for that product says it is between 63% and 71%, so it should be fine.
Where did you find the SDS for that? I looked through a dozen links on Google and could not find one. Maybe it was just because I was trying to find it being the reason that I couldn't, I don't know.
User avatar
Chewy
Posts: 172
Joined: Thu Apr 18, 2019 11:07 pm
Location: Readyville, TN United States
Motorcycle: 1980 1100i Interstate

Re: Spline paste

Post by Chewy »

This is what was delivered. It is not what is in the Amazon description.
Attachments




Post Reply