changing out radio with new one
-
- Posts: 39
- Joined: Sat Feb 26, 2011 1:29 am
- Location: Bothell, Wa.
- Motorcycle: 83honda GL1100 Aspencade
95 Concours
82 Nighthawk
changing out radio with new one
does anyone have any wiring help on what to do to change out the old radio/cb module with a new radio? the speakers work, but i can't tune the radio into get any stations, so thought i'd change to something newer. if i knew which wires went to the speakers, i could wire in a new one. there's that small multi pin connector behind the locking radio/cb, but i don't know what wires go to what. thanks for any help.
- Wilcoy02
- Posts: 1176
- Joined: Sun Nov 21, 2010 11:37 pm
- Location: Marengo, Ohio
- Motorcycle: 1983 GL1100 I purchased 3/16
1983 GL1100I frame with an 80 engine. poor boy installed with C-5 ignition--DIED in Grande Prairie Alberta Canada 8/15
98 valkyrie sold 8/16
Re: changing out radio with new one
gray goes to right speaker.
white goes to left speaker.
Sierra electronics have told me that the tuners need adjusted to get the stations to be rec'd from time to time.
white goes to left speaker.
Sierra electronics have told me that the tuners need adjusted to get the stations to be rec'd from time to time.
-
- Posts: 39
- Joined: Sat Feb 26, 2011 1:29 am
- Location: Bothell, Wa.
- Motorcycle: 83honda GL1100 Aspencade
95 Concours
82 Nighthawk
Re: changing out radio with new one
thanks, i'll see if i can locate them down in there.