The attached picture
I would appreciate your opinion! - Piero Bassi
83 GL1100 Rear Master Cylinder
-
piero
- Posts: 34
- Joined: Sun Mar 25, 2012 1:48 pm
- Location: Minneapolis, Minnesota
- Motorcycle: 1983 GL1100 Standard
83 GL1100 Rear Master Cylinder
In rebuilding my 83 GL1100 rear brake master cylinder, I am not sure of the correct position of the secondary oil seal (hugging the bottom of the master cylinder piston).
The attached picturetaken from a very well documented video on rebuilding the master cylinder, seems to show that the wider side of that slightly conical seal should face the inside of the master cylinder. Am I correct?
I would appreciate your opinion! - Piero Bassi
The attached picturetaken from a very well documented video on rebuilding the master cylinder, seems to show that the wider side of that slightly conical seal should face the inside of the master cylinder. Am I correct?
I would appreciate your opinion! - Piero Bassi
-
dingdong
- Posts: 4183
- Joined: Thu Apr 08, 2010 8:35 am
- Location: Oklahoma City
- Motorcycle: 1976 gl1000
1993 gl1500A
2004 NRX1800 Rune SOLD
Re: 83 GL1100 Rear Master Cylinder
Correct. Not should but must.
-
piero
- Posts: 34
- Joined: Sun Mar 25, 2012 1:48 pm
- Location: Minneapolis, Minnesota
- Motorcycle: 1983 GL1100 Standard
Re: 83 GL1100 Rear Master Cylinder
Thank you very much...my friend!
Piero
Piero