83 GL1100 Interstate


Information and questions on GL1100 Goldwings (1980-1983)
Post Reply
danmercer214
Posts: 30
Joined: Sun Jan 09, 2022 3:50 pm
Location: Sanford, MI 48657
Motorcycle: 1983 GL1100 Interstate

83 GL1100 Interstate

Post by danmercer214 »



Hi guys
I put new gas lines on my interstate and it is still leaking. Looks like the brass fitting is leaking where it goes into the carb body itself. Can that be fixed without get an entire carb body? I’m hoping there’s a work around because the bike is running well except for the leak. Maybe something like JB Weld. Any input is very appreciated.
Thx
Dan.


User avatar
OldguyGlen
Posts: 367
Joined: Sat Nov 24, 2018 10:55 am
Location: Mound,MN
Motorcycle: ,
1980 GL1100 STD/Vetters
1966 Honda 90

Re: 83 GL1100 Interstate

Post by OldguyGlen »

If memory serves me, that brass fuel inlet tube on #3carb easily comes out of the carb body. A bracket holds it in, look for a mounting screw right next to the tube. I think there is 1 or 2 o-rings on it??
danmercer214
Posts: 30
Joined: Sun Jan 09, 2022 3:50 pm
Location: Sanford, MI 48657
Motorcycle: 1983 GL1100 Interstate

Re: 83 GL1100 Interstate

Post by danmercer214 »

Thank you for the info. I’ll check into that asap. I appreciate the feedback.
Take care
Dan
Post Reply