was putting together an order last night with partsnmore but didnt pull the trigger in case i thought of something else i needed.
went to place it today and i noticed that the rear master kit was no longer in stock. checking other sources all i could find was k & l kits on ebay so i ordered that. i am well aware that the master cylinder itself is only available as used, but it looks to me like rebuild kits for same are getting scarce ?
gl1100 rear brake master cylinder kits.
- Balsawings
- Posts: 25
- Joined: Thu Oct 08, 2020 9:21 am
- Location: Madisonville, TN
- Motorcycle: 1981 GL1100A Interstate, 1982 GL500 Interstate
Re: gl1100 rear brake master cylinder kits.
Rear master cylinder rebuild kit available at Brake Masters.
Bob C.
Bob C.
- winguyjo
- Posts: 599
- Joined: Sat Aug 11, 2018 9:26 pm
- Location: b.c. Canada
- Motorcycle: wing7 : 1983 aspencade candy wineberry (?). current rider.
Re: gl1100 rear brake master cylinder kits.
bob, thanks very much for the reply. a search of "brake master" didn't do much but "brakemasters" gets me to an ebay store named "powerhouse automotive". they do have a lot of gl1100 caliper rebuild kits, but in spite of my best efforts, i couldn't find a listing there for a gl1100 rear master kit.
- biguns
- Posts: 129
- Joined: Tue Jun 14, 2022 3:39 pm
- Location: Ardmore Oklahoma
- Motorcycle: 1980 Interstate
Re: gl1100 rear brake master cylinder kits.
Here's something
https://www.brakecrafters.com/
here too
https://www.ebay.com/str/georgefixsmotorcycleparts
Cant hurt to give your cylinder a hone if it looks scratched
https://www.brakecrafters.com/
here too
https://www.ebay.com/str/georgefixsmotorcycleparts
Cant hurt to give your cylinder a hone if it looks scratched
- winguyjo
- Posts: 599
- Joined: Sat Aug 11, 2018 9:26 pm
- Location: b.c. Canada
- Motorcycle: wing7 : 1983 aspencade candy wineberry (?). current rider.
Re: gl1100 rear brake master cylinder kits.
thanks, biguns. both those sources do have them in stock. good to know that there are still, at least for now, a few sources. good idea re : honing, too. i will have to order a small brake cylinder hone.