87 Aspencade SEAT Removal


Information and questions on GL1200 Goldwings (1984-1987)
Post Reply
User avatar
redjetty
Posts: 34
Joined: Sun Apr 24, 2016 6:17 pm
Location: Bentonville, Ark.
Motorcycle: 1987 GL 1200 Aspencade

87 Aspencade SEAT Removal

Post by redjetty »



Im wanting to take my seat off to get to some wires etc.... First time for me to do this, (new owner). So,,,the right bolt is a 6mm alan wrench and the left is a bigger size of which I dont have,,,, can someone verify the size before i go buy the wrong size please,,,, (raining here,, cant ride, wont ride in rain) thanks rj



User avatar
geraldm
Posts: 231
Joined: Fri May 15, 2015 12:07 pm
Location: pumphandle Saskatchewan ,Canada
Motorcycle: 86 gl1200 Aspencade

Re: 87 Aspencade SEAT Removal

Post by geraldm »

If you dont have a set of allen metric you should just go buy the whole set ,,(( You will need them in the future for sure )) cant remember size but they are 2 sizes apart so must be #8 .. have a good one .

User avatar
redjetty
Posts: 34
Joined: Sun Apr 24, 2016 6:17 pm
Location: Bentonville, Ark.
Motorcycle: 1987 GL 1200 Aspencade

Re: 87 Aspencade SEAT Removal

Post by redjetty »

copy that,,,, hey geraldm,,, would you know when checking the SWR on the cb if I should put my swr meter before or after the antenna distribution box? thanks rj

User avatar
geraldm
Posts: 231
Joined: Fri May 15, 2015 12:07 pm
Location: pumphandle Saskatchewan ,Canada
Motorcycle: 86 gl1200 Aspencade

Re: 87 Aspencade SEAT Removal

Post by geraldm »

Sorry wrong guy for that but someone will pop in

sportsfreaked
Posts: 370
Joined: Fri Mar 13, 2015 7:23 am
Location: Independence, MO
Motorcycle: 1981 Honda Goldwing Interstate GL1100I
1985 Honda Goldwing Limited Edition gl1200

Re: 87 Aspencade SEAT Removal

Post by sportsfreaked »

How to tune your CB antenna SWR click on the link and it will tell you how viewtopic.php?f=11&t=4168


Thanks to all who answer and help. It is greatly appreciated!
Ed

Post Reply