Sensor


Information and questions on GL1200 Goldwings (1984-1987)
Post Reply
pjaabakken@gmail.com
Posts: 2
Joined: Fri Apr 14, 2017 2:34 pm
Location: Dovre
Motorcycle: Honda Gold wing 1200 SEI

Sensor

Post by pjaabakken@gmail.com »



Har en 86 mod Gold Wing 1200 SEI som jeg skal skifte Intake Air Pressure Sensor på. Har fåt opplyst at den sitter under den falske tanken, men skjønner ikke hvordan jeg kommer dit. Noen som har gode råd. Per Joar



User avatar
SilverDave
Posts: 566
Joined: Sun Aug 09, 2009 9:39 am
Location: Langley, BC
Motorcycle: 1985 GL1200 GoldWing Aspy

Re: Sensor

Post by SilverDave »

Rough ( Google) translation "

Has a 86 model Gold Wing 1200 SEI that I should change Intake Air Pressure Sensor. Have fåt stated that it sits under the false idea, but do not know how I get there. Someone who has good advice.

per Joar

( SilverDave )

User avatar
Rednaxs60
Posts: 2348
Joined: Wed Nov 18, 2015 12:44 pm
Location: Victoria, British Columbia, Canada
Motorcycle: 1985 GL1200 LTD
1995 GL1500 SE CDN Edition
2012 Suzuki DL1000 VStrom
2008 GL1800 (sold)
Ontario 1985 GL1200 LTD (sold)

Re: Sensor

Post by Rednaxs60 »

The intake pressure sensors, PBR/PBL, are the same sensor. The '86 SEi has two part numbers for the same sensor. P/N 36172-ML8-751 (PBL) and 36171-ML8-751 (PBR).

To get to these sensors, remove the seat and false tank. The sensors are right above the air filter box. These are the sensors with the tubes connected to them.

Hope this helps.
"When you write the story of your life, don't let anyone else hold the pen"

Ernest

pjaabakken@gmail.com
Posts: 2
Joined: Fri Apr 14, 2017 2:34 pm
Location: Dovre
Motorcycle: Honda Gold wing 1200 SEI

Re: Sensor

Post by pjaabakken@gmail.com »

Hei takk for svar, har tatt av sete og deksler samt batteri, men den falske tanken sitter liksom inne i selve ramma, men skal se litt nærmere på de i morgen, må sikkert ta den ut på høyre siden da?

User avatar
Rednaxs60
Posts: 2348
Joined: Wed Nov 18, 2015 12:44 pm
Location: Victoria, British Columbia, Canada
Motorcycle: 1985 GL1200 LTD
1995 GL1500 SE CDN Edition
2012 Suzuki DL1000 VStrom
2008 GL1800 (sold)
Ontario 1985 GL1200 LTD (sold)

Re: Sensor

Post by Rednaxs60 »

4 bolts hold the false tank on then lift back and up. May have to spread the bottom of the false tank a bit.
"When you write the story of your life, don't let anyone else hold the pen"

Ernest

User avatar
SilverDave
Posts: 566
Joined: Sun Aug 09, 2009 9:39 am
Location: Langley, BC
Motorcycle: 1985 GL1200 GoldWing Aspy

Re: Sensor

Post by SilverDave »

Google Translation :
<< Hey thanks for the reply, has taken the seat and covers as well as the battery, but the fake tank sits somehow inside the frame, but take a closer look at those tomorrow, be sure to take it out on the right side then?>>

SilverDave's comment :

On some models, the front false tank bolts are hidden under the left and right glove box ( plastic) which may have to be removed first . Then the false tank just lifts straight up and back .
SilverDave


Google :
<<På noen modeller, blir de fremre falske tank bolter skjult under venstre og høyre hånd i hanske-boksen (plast) som kan ha som skal fjernes først. Da den falske tanken løfter bare rett opp og tilbake.>>



Post Reply