Gl 1200 headgasket
-
ronscycle1
- Posts: 60
- Joined: Sat Oct 31, 2009 2:58 pm
- Location: Kinmundy IL.
- Motorcycle: 1987 gl 1200 I
-
Charlie1Horse
- Posts: 736
- Joined: Mon Sep 16, 2013 9:35 pm
- Location: Jacksonville, Florida
- Motorcycle: 1986 GL1200A Aspencade
1992 GL1500I Interstate
Re: Gl 1200 headgasket
What springs are you referring to? I am looking at my GL1200 FSM cylinder head section and I don't see any springs on the rocker shafts. Do you mean valve springs?
Russell
Those who say it cannot be done should try not to interrupt those who are doing it.
Russell
Those who say it cannot be done should try not to interrupt those who are doing it.
Those who say it cannot be done should try not to interrupt those who are doing it.
-
ronscycle1
- Posts: 60
- Joined: Sat Oct 31, 2009 2:58 pm
- Location: Kinmundy IL.
- Motorcycle: 1987 gl 1200 I
Re: Gl 1200 headgasket
I'm talking about the springs that turns the rocker arm shafts for the valve clearance adjustment
-
Charlie1Horse
- Posts: 736
- Joined: Mon Sep 16, 2013 9:35 pm
- Location: Jacksonville, Florida
- Motorcycle: 1986 GL1200A Aspencade
1992 GL1500I Interstate
Re: Gl 1200 headgasket
Sorry, my 84-86 Factory Service Manual doesn't show any springs on the rocker shafts. It shows adjusting the valves with shims. The 87 must be different.
Russell
Those who say it cannot be done should try not to interrupt those who are doing it.
Russell
Those who say it cannot be done should try not to interrupt those who are doing it.
Those who say it cannot be done should try not to interrupt those who are doing it.