ignition switch
-
macoasta
- Posts: 1
- Joined: Wed Jun 06, 2018 8:33 pm
- Location: jacksonville Texas
- Motorcycle: 1987goldwing interstate 1200cc
1990 Goldwing interstate 1500 cc
ignition switch
my ignition switch is not getting the lights on to start the motor and is stock in parking position can anyone help me with it.
-
WingAdmin
- Site Admin
- Posts: 23617
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer - Contact:
Re: ignition switch
Try pulling the steering all the way one way or the other while gently turning the key. If that doesn't do it, try rocking the steering gently one way and the other while gently turning the key.
-
CrystalPistol
- Posts: 1421
- Joined: Wed Mar 10, 2010 9:07 pm
- Location: Shenandoah Valley of Virginia
- Motorcycle: 1997 GL1500SE/'98 Lehman Trike
Re: ignition switch
I recall reading posts about ignition switches where the rivets holding the together
letting go ... been a good while ... but as I recall the backs with contacts drop.
Check under the switch below top triple tree.
letting go ... been a good while ... but as I recall the backs with contacts drop.
Check under the switch below top triple tree.
Make Courtesy your "Code of the Road" …
… & Have a Safe Trip!
… & Have a Safe Trip!