Aspy tool kit

maestro319 · Post by **maestro319** » Sat Dec 11, 2010 8:30 pm

Bought an '86 GL1200 Aspencade last April. it did not have the tool kit. Does anyone kknow where I could get one? Or should I try to just put one together from Home Depot, Lowes, etc.? If that's the route I should take, what should I have in it?

mtfm · Post by **mtfm** » Tue Dec 14, 2010 6:05 pm

Keep checking on Ebay. I found the correct tool kit for my 85 LTD there. There was a "standard Wing kit on it last week. They pop up every now and then.

John Moore
Washington NC

maestro319 · Post by **maestro319** » Tue Dec 14, 2010 6:14 pm

cool. thanks, I'll keep checking.

YouTube · Post by **WingAdmin** » Tue Dec 14, 2010 6:42 pm

I looked it up in the owner's manual for the 85 Aspencade, and here is what it listed:

Ratchet Handle
Socket wrench 19 mm
Socket wrench 17 mm
Socket wrench 14 mm
Socket wrench 12 mm
Socket wrench 10 mm
Socket wrench 8 mm
Box wrench 10 x 12 mm
Box wrench 27 mm
Box wrench 18 mm
8 x 7 mm open end wrench
10 x 12 open end wrench
Open end wrench 17 mm
Open end wrench 14 mm
8 mm hex wrench
6 mm hex wrench
5 mm hex wrench
Extension bar
Adaptor
No. 3 screwdriver
No. 2 screwdriver
No. 1 screwdriver
Screwdriver grip
Pliers
Adjustable wrench
Feeler gauge 0.7 mm
Tool bag
Air pressure gauge

This is the image from the 86-87 parts manual (click for full size):

: GL1200 Tool Kit

The accompanying list of part numbers and descriptions follows:

1 89010-MG9-000 TOOL SET
2 89101-431-671 BAG, TOOL
3 89102-469-003 BAG, AIR PRES GA
4 89103-MG9-680 GAUGE, FEELER (0.8)
5 89103-371-000 GAUGE, FEELER (0.7)
6 89210-431-670 PLIERS (150)
7 89211-431-671 WRENCH, PLUG BOX
8 89213-431-670 SCREWDRIVER 2
8 89227-422-000 SCREWDRIVER 2
9 89214-431-670 SCREWDRIVER 3
10 89215-431-670 SCREWDRIVER 2
11 89216-431-670 GRIP
12 89217-MB9-000 WRENCH, EYE (14)
13 89217-431-670 HANDLE (120MM)
14 89218-MB9-870 WRENCH, EYE (17)
15 89219-431-670 WRENCH, EYE (19)
16 89220-MG9-000 WRENCH, EYE (27MM)
16 99006-27000 WRENCH, EYE (27MM)
17 89221-371-000 WRENCH, HEX. (6MM)
18 89221-429-000 WRENCH, HEX. (5MM)
19 89222-371-000 WRENCH, HEX. (8MM)
20 89223-431-670 BAR A, HANDLE
21 89224-431-670 WRENCH (8X12)
22 89225-431-670 SPANNER (10X12)
23 89226-431-670 SPANNER (10X14)

frostypop · Post by **frostypop** » Fri Dec 31, 2010 10:56 pm

if you have not already found one, i would keeping looking on e-bay, i just looked on bikebandit.com and they want $497.00 for the complete tool kit...

maestro319 · Post by **maestro319** » Fri Dec 31, 2010 11:06 pm

Whaaaaaaat??????? $497.00??? Are they crazy???

frostypop · Post by **frostypop** » Sat Jan 01, 2011 1:43 pm

that was pretty much my reaction too!

frostypop · Post by **frostypop** » Sat Jan 01, 2011 2:40 pm

hey i went back to bike bandit and i think they just put that high price in there so no one would try to order it because they no longer have the complete set.

littlebeaver · Post by **littlebeaver** » Fri Feb 04, 2011 8:25 pm

Maestro, I have those tools all in a small pouch I made out of leather, I sat in front of the TV set and sewed it together, the tools just fit fine, cheap way for ya..

maestro319 · Post by **maestro319** » Fri Feb 04, 2011 8:43 pm

Way cool littlebeaver. Post a picture or two. And...where'd you get your tools? Did you put them together from a "big box" store, or what?

littlebeaver · Post by **littlebeaver** » Fri Feb 04, 2011 9:15 pm

That's quite a job that Wingman did for you there Maestro, wow..the guy really cares..Here is the cheap pouch I made out of a old coat..Ha ha

Hey, I'm Mr. el cheapo dude..

: Just get those tools off his list or out of your tool box and stuff them in there, it's 8x10 to the flap opening.

Just sew it inside out so the pretty stuff is inside then when done turn it inside out..

HALBUDD · Post by **HALBUDD** » Fri Feb 04, 2011 10:52 pm

Hay littlebeaver : Just the little homemaker lol HA HA Hal

littlebeaver · Post by **littlebeaver** » Fri Feb 04, 2011 11:33 pm

Why I oughta....Told ya I was cheap, you do what ya gotta do..Homemaker...Why...

Mooseman · Post by **Mooseman** » Sat Feb 05, 2011 12:11 am

maestro319,
I sent you a PM

HALBUDD · Post by **HALBUDD** » Sat Feb 05, 2011 4:16 pm

littlebeaver: just having some fun with ya . lol Hal

actionpack · Post by **actionpack** » Sat Feb 05, 2011 9:56 pm

i did'nt see this asked , but did ya look in the left saddle bag in the rear pocket , if so , don't pay any attention to this reply

maestro319 · Post by **maestro319** » Sat Feb 05, 2011 10:36 pm

Yeah, I looked. All I found was the tool kit pouch. But, no tools.

actionpack · Post by **actionpack** » Sun Feb 06, 2011 8:23 am

maestro319 wrote:Yeah, I looked. All I found was the tool kit pouch. But, no tools.

that sucks , guess making a set up is your option ,was hopeing they were hideing from ya in that saddle bag

starfleetengineer · Post by **starfleetengineer** » Mon Feb 07, 2011 8:57 am

mtfm wrote:Keep checking on Ebay. I found the correct tool kit for my 85 LTD there. There was a "standard Wing kit on it last week. They pop up every now and then.

John Moore
Washington NC

http://cgi.ebay.com/ebaymotors/Honda-Go ... ccessories

I found this on EBay right now. Give it a check.

tfdeputydawg · Post by **tfdeputydawg** » Mon Feb 07, 2011 9:30 am

http://www.cruztools.com/products/kitsmetric.html

maestro319 · Post by **maestro319** » Wed Feb 09, 2011 8:03 pm

Just bought it. $25.00 for shipping seemed pricey, but I guess the tool kit does have some weight to it. I'll let you know how it is when I get it.

frostypop · Post by **frostypop** » Wed Feb 09, 2011 9:24 pm

maestro319 wrote:Just bought it. $25.00 for shipping seemed pricey, but I guess the tool kit does have some weight to it. I'll let you know how it is when I get it.

i think some folks on e-bay over charge on shipping to make up for the price bought if it goes cheap...and some just over price it, but you also have the handling if you have to drive it to the Post Office or wherever...but if you want it or need it...it can be cheaper than running all over town looking for it...

maestro319 · Post by **maestro319** » Wed Feb 09, 2011 11:09 pm

You got that right, frosty. I guess $25.00 isn't too out of line since a box of tools could be rather heavy. I jus hope I get all of the ones that are shown in the picture. I have heard of "bait and switch" on E-Bay. Probably doesn't happen too often though.
I'll keep ya posted.
Thanks again.
P.

starfleetengineer · Post by **starfleetengineer** » Thu Feb 10, 2011 12:00 am

I hope it works out for you

maestro319 · Post by **maestro319** » Sat Feb 12, 2011 8:52 pm

Got the tool set today. Smaller in size than I expected, but that's ok. For what I need it for (quick minor road repairs) it'll do just fine. I will have to supplement it though. It came with a socket wrench and extension but NO sockets!! I'm sure I can find some around here to put into the pouch. Probably a 7mm, 8mm, 9mm and 10mm. It has a LOT of Allen wrenches in it too, but I do have a metric combo set I'm going to add. It also has 2 feeler guages, a pin type and a blade type. Can any of you think of anything else I absolutely have to have?? Thanks.

Aspy tool kit

Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit

Re: Aspy tool kit