Stator wiring
-
needasmoke
- Posts: 9
- Joined: Sun Feb 25, 2018 5:51 am
- Location: Michigan
- Motorcycle: 1982 Gl1100I Honda Goldwing Interstate
1993 Gl1500 Honda Goldwing Aspencade
Stator wiring
Quick question, I am in the process of soldering my 3 wire connector, and shrink tubing it. Do I tie off the harness or is it just best to let it hang? newbie question I know, but just want to do it right.
-
virgilmobile
- Posts: 9102
- Joined: Sun Sep 19, 2010 5:39 pm
- Location: Denham Springs,La.
- Motorcycle: 1988 GL1500 I
Previously owned
78 GL1000
81 GL1100
82 GL1100 I
83 GL1100 I
83 GL1100 standard
84 GL 1200 I
Re: Stator wiring
I tidy my wiring to keep vibration damage to a minimum.Dangling wires can have that "tin can"affect and break at the secured point.
-
Charlie1Horse
- Posts: 736
- Joined: Mon Sep 16, 2013 9:35 pm
- Location: Jacksonville, Florida
- Motorcycle: 1986 GL1200A Aspencade
1992 GL1500I Interstate
Re: Stator wiring
I took a 2" piece of 1/4 inch fuel hose and shoved it through the hole where the connector was locked in, and, after soldering the wires and heat shrink, I pushed the three wires through the hose and they cannot move. Plus, they are right where they were originally.
Russell
Those who say it cannot be done should try not to interrupt those who are doing it.
Russell
Those who say it cannot be done should try not to interrupt those who are doing it.
Those who say it cannot be done should try not to interrupt those who are doing it.