85 Goldwing


Information and questions on GL1200 Goldwings (1984-1987)
  • Sponsored Links
Post Reply
Single-shot-Steve
Posts: 2
Joined: Sun Sep 01, 2019 8:27 pm
Location: Hattiesburg,MS
Motorcycle: 85 Honda Goldwing Limited Edition

85 Goldwing

Post by Single-shot-Steve » Sun Sep 01, 2019 8:34 pm



:o Ok guys I'm working on a buddies 85 Honda Goldwing Limited Edition. When trying to find the ICM ignition control module I could not find what they where showing online to be that part. What I did find I will try to post a picture of. But this part does not have anything on it telling what it is. Personally I think it is the spark relay. Which is why I think it's not firing at all. On the bottom side of this part you can tell it's burnt. So if anyone can tell me for sure what this part is. I would appreciate it very much. Thanks
IMG_20190830_173435.jpg



User avatar
offcenter
Posts: 620
Joined: Sat Sep 22, 2012 2:10 pm
Location: Lake Hopatcong, New Jersey
Motorcycle: 99 Gl-1500 SE
76 GL-1000
77 Honda Trail 90

Re: 85 Goldwing

Post by offcenter » Mon Sep 02, 2019 3:53 am

No picture, Steve.
Wish I could be of some help, but I've never owned that model.
Welcome to the forum.
George in Jersey.
99 Goldwing GL-1500 SE
76 Goldwing Gl-1000
77 Honda CT-90 "Trail 90"

Single-shot-Steve
Posts: 2
Joined: Sun Sep 01, 2019 8:27 pm
Location: Hattiesburg,MS
Motorcycle: 85 Honda Goldwing Limited Edition

Re: 85 Goldwing

Post by Single-shot-Steve » Mon Sep 02, 2019 4:01 am

Ok. Thanks anyway. I will try and put that picture up later.

User avatar
Rednaxs60
Posts: 2057
Joined: Wed Nov 18, 2015 12:44 pm
Location: Victoria, British Columbia, Canada
Motorcycle: 1985 GL1200 LTD
1995 GL1500 SE CDN Edition
2012 Suzuki DL1000 VStrom
2008 GL1800 (sold)
Ontario 1985 GL1200 LTD (sold)

Re: 85 Goldwing

Post by Rednaxs60 » Tue Sep 03, 2019 8:02 pm

The ECU is under the trunk. This unit controls the whole CFI system, is integrated with the travel computer that sends signals to the dash for various readouts.

The spark igniters are just forward of the air filter under the PB sensors. These are the rectangular grey units, about 1 1/2 inch by 1 inch.


"When you write the story of your life, don't let anyone else hold the pen"

Ernest

Post Reply