Electrical Component Location help

[sphen]

1- Where is the clutch diode? I cant for the life of me find it! Trying to troubleshoot the starting system, and thats the last item on the checklist.

2- To the left of the battery, theres the wires that feed from the alternator. There's another spot to the left where a wire harness should be, but on my bike its missing. What is it supposed to be? On that bracket next to the alternator wire..

3- If the starter relay 'clicks' with button pushed and clutch switch closed, but doesnt if no clutch AND bike is in neutral, does that mean a neutral sensor etc is bad? Or will it only start with clutch down? The way i read the schematic, it should start if EITHER condition is met (see item #1....clutch diode? Neutral sensor? The LCD displays the correct gear... )


....and...the alternator wires are badly burned. Can I assume this bike likely had alternator troubles before hung up wet?

[DaRamblerman]

Do you mean neutral switch?

[DaRamblerman]

Alt wires being burnt means the upgrade has not been done to fix loose dirty connections. Instruction are on this site to fix.