piston seals, dust seals


Information and questions on GL1200 Goldwings (1984-1987)
Post Reply
bernyboy
Posts: 41
Joined: Sat May 16, 2015 10:43 am
Location: Cranbrook,British Columbia,Canada
Motorcycle: 1984 GL1200 Standard

piston seals, dust seals

Post by bernyboy »



Just a quick question, are the brake piston seals the same front and back on a 1984 gl1200? Also are the dust seals the same front and back?



User avatar
bruce swaybill
Posts: 109
Joined: Wed Dec 11, 2013 11:26 pm
Location: farmington, ct
Motorcycle: .
1983 honda gl1100i interstate
2009 triumph bonneville t100

Re: piston seals, dust seals

Post by bruce swaybill »

The front left and rear calipers use 32mm pistons while the front right has 25mm pistons. Each caliper will have these numbers stamped on the forward facing side just above the Exit of the disk. The difference is part of the linked brakes system.
Your Honda dealer will have the latest versions of these seals.

Good luck!
Bruce S.
Have a nice day! :)

Post Reply