85 Aspencade rebirth
-
Mtustin
- Posts: 2
- Joined: Mon Aug 29, 2016 4:00 pm
- Location: Fonthill Ontario canada
- Motorcycle: 1985 goldwing aspencde
85 Aspencade rebirth
Working on 1985 Aspencade air compressor. The compressor runs and pumps air but the LCD is pinned to the top. Drops to 0 when I unplug the pressure sensor. With the ignition on I'm reading 4.7 volts at the plug for the pressure sensor. When I start the bike the LCD is supposed to switch over to temperature but it just stays pinned to air. Is there a relay in there somewhere that's not moving or crudded up. Any thoughts ? MT
-
LeMaitre
- Posts: 121
- Joined: Mon Apr 10, 2017 8:03 pm
- Location: NE Minnesota
- Motorcycle: 1985 GL1200A Aspencade
1975 CB550F Super Sport
Re: 85 Aspencade rebirth
Just a thought, since I don't have this problem on my '85, have you cleaned the air compressor switch contacts?
-Mark
-Mark
1985 GL1200A, MN SS1K, Iowa Ironbutt sign SS1K, MN-1000-2021, Krazzy Key West SS1K
1975 CB550F, Lake Superior SS1K, 45-90 SS1K, All in Yooper SS1K, SS2K
1975 CB550F, Lake Superior SS1K, 45-90 SS1K, All in Yooper SS1K, SS2K