o ring for 86 gl 1200 rad to engine


Information and questions on GL1200 Goldwings (1984-1987)
Post Reply
86 goldwing
Posts: 56
Joined: Tue May 14, 2019 3:50 pm
Location: ontario canada
Motorcycle: 1986 gl1200 a

o ring for 86 gl 1200 rad to engine

Post by 86 goldwing »



can anyone tell me where i can get a new o ring for the housing from my rad to engine block


Shadowjack
Posts: 74
Joined: Wed Aug 17, 2011 5:22 pm
Location: Bellevue, NE
Motorcycle: 1977 GL1000
1975 CB750
2011 NT700VA

Re: o ring for 86 gl 1200 rad to engine

Post by Shadowjack »

This is an odd sized o-ring, IIRC. I always check online Honda parts vendors first for uncommon parts. This my personal favorite, but if they show it, any dealer can get it.
https://www.partsfish.com/oemparts/a/ho ... thermostat, Item 14, 91307-MB0-003.
86 goldwing
Posts: 56
Joined: Tue May 14, 2019 3:50 pm
Location: ontario canada
Motorcycle: 1986 gl1200 a

Re: o ring for 86 gl 1200 rad to engine

Post by 86 goldwing »

thanks shadow jack will call honda tomorrow stores all closed here to day
User avatar
Rednaxs60
Posts: 2616
Joined: Wed Nov 18, 2015 12:44 pm
Location: Victoria, British Columbia, Canada
Motorcycle: 1985 GL1200 LTD
2014 Can-Am Spyder RT LE
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
2008 GL1800 (sold)
Ontario 1985 GL1200 LTD (sold)

Re: o ring for 86 gl 1200 rad to engine

Post by Rednaxs60 »

Can also go to a local hydraulic shop with the old. P/N 91305-426-003 Size 46X2 mm
"When you write the story of your life, don't let anyone else hold the pen"

Ernest
Shadowjack
Posts: 74
Joined: Wed Aug 17, 2011 5:22 pm
Location: Bellevue, NE
Motorcycle: 1977 GL1000
1975 CB750
2011 NT700VA

Re: o ring for 86 gl 1200 rad to engine

Post by Shadowjack »

That's the lower one at the water pump cover. The upper one at the thermostat is 54x2. It wasn't actually stated which was wanted.


Post Reply