air release
-
bigguy
- Posts: 62
- Joined: Sun May 08, 2016 4:02 pm
- Location: 2 Ryan street, River Ryan Nova Scotia Canada
- Motorcycle: 1982 Aspencade 1984 Aspencade 2009 Suzuki 1500 Boulevard 1997 Aspencade
air release
My project bike is a 1984 Aspy. I have it pretty well on the road but for one problem. The front forks have way too much air and the on board compressor will not release. How can I drain the air manually?
-
joecoolsuncle
- Posts: 562
- Joined: Sun Sep 26, 2021 6:10 am
- Location: oxford, ar
- Motorcycle: 1984 gl1200a
Re: air release
loosen the air hose, allow air to escape, tighten hose. remove right side lower fairing. you will see the "manifold" where the hoses connect to the pump unit.
-
bigguy
- Posts: 62
- Joined: Sun May 08, 2016 4:02 pm
- Location: 2 Ryan street, River Ryan Nova Scotia Canada
- Motorcycle: 1982 Aspencade 1984 Aspencade 2009 Suzuki 1500 Boulevard 1997 Aspencade
Re: air release
Thanks for the quick response