Gl1200 1984. Interstate lifters

Gonk1200 · Post by **Gonk1200** » Thu Nov 03, 2022 6:42 am

Hi does anyone know what way up the hydraulic lifters go in,is it small end first,as 2 of mine seem to be other way round

Rednaxs60 · Post by **Rednaxs60** » Thu Nov 03, 2022 8:56 am

Lifters are small end up. The intake lifters are on the bottom and have a cap that sits on the small end and against the rocker arm. If you did not see a small cap on the intake lifter(s) check the lifter hole. Detailed in the service manual.

Gonk1200 · Post by **Gonk1200** » Thu Nov 03, 2022 4:29 pm

I see 2x of those caps,but not on other 2,these were put in other way round,I thought all go small end first,how do the others attach then as you only have 1/2 to seat on.

Rednaxs60 · Post by **Rednaxs60** » Fri Nov 04, 2022 7:54 am

Caps are only used on the intake lifters.

Gl1200 1984. Interstate lifters

Gl1200 1984. Interstate lifters

Re: Gl1200 1984. Interstate lifters

Re: Gl1200 1984. Interstate lifters

Re: Gl1200 1984. Interstate lifters