GL1200 starting

[naor65]

Hi . im trying to start Gl1200 after years it didn't start . i get sparks on the plugs , timing is correct . i injected some fuel to the cylinders , also some carburetor spray . it wouldn't start . Can it be something with the hydraulic valve lifters ? i have no experience with that . can it be adjust ? cleaned ? Thanks

[Rambozo]

Have you checked compression?

[joecoolsuncle]

timing is correct? as in cam timing? in any case, you need to replace those rotted belts before you have what rambozo has eluded to. then you can find your compression numbers and provide a clean path for fresh fuel to flow.
do not use any more starting fluid. it is bad on ring lands and piston skirts.

[naor65]

Yes I did check compression . I get around 140 PSI in cold engine in all 4 of them cylinders . I do use clean fresh fuel .
I will check timing once more .

[Bike...and Dennis]

Did you ever get this resolved?

[Rusty1320]

Looking for a starter solenoid for a 1986 gl1200 and leads

[Bike...and Dennis]

They are available new. A little spendy, but it will outlive the bike.

https://www.partzilla.com/catalog/honda ... te/battery