Somehow I've managed to crack the plastic panel round the suspension/compressor controls.
Can anyone tell me how I get it out for repair? I'm assuming it's maybe dummy tank off and get to it that way? Does it just pop out if pressed from behind?
Compressor control panel
-
TreeLad
- Posts: 4
- Joined: Mon Jan 24, 2022 5:07 am
- Location: United Kingdom
- Motorcycle: 1984 GL1200 Aspencade
Compressor control panel
Hi all. 1984 Aspencade.
Somehow I've managed to crack the plastic panel round the suspension/compressor controls.
Can anyone tell me how I get it out for repair? I'm assuming it's maybe dummy tank off and get to it that way? Does it just pop out if pressed from behind?
Somehow I've managed to crack the plastic panel round the suspension/compressor controls.
Can anyone tell me how I get it out for repair? I'm assuming it's maybe dummy tank off and get to it that way? Does it just pop out if pressed from behind?
-
Rambozo
- Posts: 3091
- Joined: Sun Apr 01, 2018 8:36 pm
- Location: Disneyland
- Motorcycle: 1992 GL1500 Aspencade
Ducati Monster
Re: Compressor control panel
Do you stand on your head to set the pressures?
-
ksigurdsen
- Posts: 30
- Joined: Tue Dec 10, 2013 7:49 pm
- Location: West Palm Beach, FL
- Motorcycle: 1984 GL1200A Aspencade
Re: Compressor control panel
The cover is retained by spring clips, one in each corner. Pry carefully with a flat blade screw driver or automotive trim removal tool. The panel on my '84 Aspy was cracked so I kept an eye on Ebay until a good one showed up.
-
TreeLad
- Posts: 4
- Joined: Mon Jan 24, 2022 5:07 am
- Location: United Kingdom
- Motorcycle: 1984 GL1200 Aspencade
Re: Compressor control panel
Thanks for that. I'm keeping an eye open but I'm told they're hens teeth PLUS I'm in UK which makes it harder. Getting one over from America (or bloody anywhere since bloody Brexit) would cost a fortune, so thinking repair best bet.
Thanks again for the help.
Thanks again for the help.