Page 1 of 1

just looking for a little help

Posted: Sun Jul 22, 2018 6:39 pm
by usmcbiker
I have a 1998 GL1500 SE, I've got a small antifreeze leak on the front on the bike, I don't have the knowledge about goldwings to get to where the leak is. Looking for someone or shop in the midwest that could take care of this problem. other wise the bike runs a drives great.

Re: just looking for a little help

Posted: Mon Jul 23, 2018 12:43 pm
by raven41951
If you go to the DIY forum and look for changing timing belts in the 1500 section, that will show you how to remove the tupperware around the front of the bike to find your leak.

Re: just looking for a little help

Posted: Wed Jul 25, 2018 9:13 am
by usmcbiker
Thanks, I'll have to check it out. Still would like to find a shop (other than dealership) or Goldwing guru in the Midwest.


this is where the leak is coming from, not from the radiator or any holes on the front but from the top of the motor.