Throttle cables


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
Redhot
Posts: 65
Joined: Thu Sep 14, 2017 6:44 am
Location: England
Motorcycle: Gl1500 K

Throttle cables

Post by Redhot » Fri Aug 31, 2018 1:28 pm



So, I needed to remove throttle grip tube. Took apart switch housing, and slackened off cable adjustment barrels, there were two on one cable, one of which was slackened at least 15mm of thread.I still had no slack where cables connected to throttle tube ? I just managed to get one off using needle nose pliers, but a real struggle. On my other bikes I've backed off barrel adjustment and that's left slack to pull back and remove. Not looking forward to putting back on. Why Am I having this problem ? The bike runs fine btw.



Post Reply