GL1500 keyless ignition switch and bank angle sensor


Information and questions on GL1500 Goldwings (1988-2000)
  • Sponsored Links
Post Reply
PiotrGL1500
Posts: 25
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

GL1500 keyless ignition switch and bank angle sensor

Post by PiotrGL1500 » Sun Feb 03, 2019 9:02 am



I'm about removing ignition switch (I already bore the bolts and all removed) and use RFID wireless sensor that works up to 2m. So the idea is to conect wires (that is why I do need wire schema of ignition switch and suggestions) to ON position and secure with RFID device https://www.aliexpress.com/item/RFID-ca ... 4c4dfGr8OH
Now I trying to figure out how to connect the wires to have hard connected ignition switch? Someone did it before?

Another question is about bank angle sensor, how to wire arround that sensor, just want to remove it from my bike? I know that is security reason and safety but anyway for now that is what I'm going to do, so if someone culd "throw me a light" how to wire arround..



User avatar
Erdeniz Umman
Posts: 791
Joined: Tue Oct 27, 2015 12:33 am
Location: Ankara Turkey
Motorcycle: 2000 GL1500SE

Re: GL1500 keyless ignition switch and bank angle sensor

Post by Erdeniz Umman » Sun Feb 03, 2019 12:03 pm

You can download the wiring diagrams in the following link.
Especially, if your bike is an European model, you can use the EuroSpec diagram that I have added in the PDF file.
https://www.goldwingfacts.com/forums/2- ... agram.html

PiotrGL1500
Posts: 25
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: GL1500 keyless ignition switch and bank angle sensor

Post by PiotrGL1500 » Sun Feb 03, 2019 1:05 pm

Thanks for info. Great diagrams, lot of good work!!!! Do you have that diagrams in high res maybe?? I'd like to print them on A3 format that will be readable.

User avatar
bellboy40
Posts: 522
Joined: Fri Nov 27, 2009 1:13 pm
Location: Brewton, AL
Motorcycle: 2000 GL1500SE Candy Spectra Red
1994 GL1500SE Pearl Bermuda Green

Re: GL1500 keyless ignition switch and bank angle sensor

Post by bellboy40 » Sun Feb 03, 2019 5:02 pm

Here is how you can bypass that BAS.



User avatar
Erdeniz Umman
Posts: 791
Joined: Tue Oct 27, 2015 12:33 am
Location: Ankara Turkey
Motorcycle: 2000 GL1500SE

Re: GL1500 keyless ignition switch and bank angle sensor

Post by Erdeniz Umman » Mon Feb 04, 2019 12:09 am

PiotrGL1500 wrote:
Sun Feb 03, 2019 1:05 pm
Thanks for info. Great diagrams, lot of good work!!!! Do you have that diagrams in high res maybe?? I'd like to print them on A3 format that will be readable.
They are all in high resolution, check your computer.

PiotrGL1500
Posts: 25
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: GL1500 keyless ignition switch and bank angle sensor

Post by PiotrGL1500 » Mon Feb 04, 2019 3:43 am

Thanks bellboy40. Will do this "surgery" soon. So far have plenty of work because I do rewire some harnes to get rid of inwanted stuff.
ERDENIZ, tahnks a lot again for this wiring diagrams, that will simpify my work. I have plenty of ideas but lack time. I have also few other bikes in my stable.



User avatar
AZgl1800
Posts: 1579
Joined: Thu Oct 30, 2008 2:46 pm
Location: Lake Oologah Indian Territory USA
Motorcycle: '02 GL1800

Re: GL1500 keyless ignition switch and bank angle sensor

Post by AZgl1800 » Mon Feb 04, 2019 4:14 am

Erdeniz Umman wrote:
Mon Feb 04, 2019 12:09 am
PiotrGL1500 wrote:
Sun Feb 03, 2019 1:05 pm
Thanks for info. Great diagrams, lot of good work!!!! Do you have that diagrams in high res maybe?? I'd like to print them on A3 format that will be readable.
They are all in high resolution, check your computer.
oh yes, they are....

I zoomed in down to just a wire or two, and was amazed at how much detail you retained on those schematics.
~John

User avatar
bellboy40
Posts: 522
Joined: Fri Nov 27, 2009 1:13 pm
Location: Brewton, AL
Motorcycle: 2000 GL1500SE Candy Spectra Red
1994 GL1500SE Pearl Bermuda Green

Re: GL1500 keyless ignition switch and bank angle sensor

Post by bellboy40 » Mon Feb 04, 2019 7:58 am

Yes, those are some beautiful hi-res color diagrams. Looks like a lot of work went into making those. Thanks again Erdeniz.

User avatar
DougEFresh1123
Posts: 143
Joined: Mon Aug 27, 2018 10:22 am
Location: Villa Park, IL
Motorcycle: 2002 Honda Magna VF750
1994 GL1500SE

Re: GL1500 keyless ignition switch and bank angle sensor

Post by DougEFresh1123 » Tue Feb 05, 2019 9:44 am

Erdeniz Umman wrote:
Sun Feb 03, 2019 12:03 pm
You can download the wiring diagrams in the following link.
Especially, if your bike is an European model, you can use the EuroSpec diagram that I have added in the PDF file.
https://www.goldwingfacts.com/forums/2- ... agram.html
Thank you for taking the time to create these wiring diagrams! I will be putting these to good use. :D
'02 Magna VF750
'96 GL1500SE
- Doug

“We must reject the idea that every time a law's broken, society is guilty rather than the lawbreaker. It is time to restore the American precept that each individual is accountable for his actions.”
― Ronald Reagan

PiotrGL1500
Posts: 25
Joined: Sat Nov 17, 2018 1:13 pm
Location: Krakow, Poland
Motorcycle: GL 1500 1990
Contact:

Re: GL1500 keyless ignition switch and bank angle sensor

Post by PiotrGL1500 » Wed Feb 06, 2019 3:32 pm

Little progress in striping down my GL1500, just throw away air injection system, now will pull carbs. The biggest problem is wiring loom because I need to route it somewhere close to air box not surrounding front of handlebar.











Post Reply