air intake vacuum line
-
- Posts: 20
- Joined: Sun Mar 17, 2019 4:17 pm
- Location: ft worth, texas
- Motorcycle: 1995 goldwing
air intake vacuum line
I have a 95 goldwing I know that the pink label line goes from the valve to the bottom of the air box but mine as a T and cant figure out where the other lead goes. Does anyone have any idea?
thanks
thanks
- Erdeniz Umman
- Posts: 967
- Joined: Tue Oct 27, 2015 12:33 am
- Location: Ankara Turkey
- Motorcycle: 2000 GL1500SE
-
- Posts: 20
- Joined: Sun Mar 17, 2019 4:17 pm
- Location: ft worth, texas
- Motorcycle: 1995 goldwing
Re: air intake vacuum line
nope that the valve connection but if you follow that hose you barley see the white T. One goes to the bottom of air box but where does the other hose go to from the bottom of the T?
- Erdeniz Umman
- Posts: 967
- Joined: Tue Oct 27, 2015 12:33 am
- Location: Ankara Turkey
- Motorcycle: 2000 GL1500SE
Re: air intake vacuum line
Ok then, it goes to the carburetor as shown in the diagram below.
- Erdeniz Umman
- Posts: 967
- Joined: Tue Oct 27, 2015 12:33 am
- Location: Ankara Turkey
- Motorcycle: 2000 GL1500SE
-
- Posts: 20
- Joined: Sun Mar 17, 2019 4:17 pm
- Location: ft worth, texas
- Motorcycle: 1995 goldwing
Re: air intake vacuum line
Well I've heard worse news not sure when that was. thanks for your help i was really wondering since everyone else had the hose direct to the box. this saved me time.
-
- Posts: 20
- Joined: Sun Mar 17, 2019 4:17 pm
- Location: ft worth, texas
- Motorcycle: 1995 goldwing
Re: air intake vacuum line
Found a better pic of it but it means I have to tear the carb out again.
- Erdeniz Umman
- Posts: 967
- Joined: Tue Oct 27, 2015 12:33 am
- Location: Ankara Turkey
- Motorcycle: 2000 GL1500SE
Re: air intake vacuum line
Maybe you can reach there just removing the air filter box.
Another picture of the pink tube connection.
Another picture of the pink tube connection.
-
- Posts: 20
- Joined: Sun Mar 17, 2019 4:17 pm
- Location: ft worth, texas
- Motorcycle: 1995 goldwing
Re: air intake vacuum line
I will update you on that I might be able to.
-
- Posts: 20
- Joined: Sun Mar 17, 2019 4:17 pm
- Location: ft worth, texas
- Motorcycle: 1995 goldwing
Re: air intake vacuum line
Well this is the end of issue. Carburetor had to be disassembled on the front side and angled but its in. Bike runs fine after replacing pilot jets so its back together for spring ride. Thank you for your support.
Regards
Regards