1500 lower steering race removal tool
-
- Posts: 30
- Joined: Fri Mar 11, 2011 4:42 pm
- Location: chicago, illinois
- Motorcycle: 1995 gl 1500 se
1500 lower steering race removal tool
i saw where WingAdmin used a long chisel, modified on the end to catch the top of the lower race. where can i get that chisel made? thanks
- WingAdmin
- Site Admin
- Posts: 21591
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer
Re: 1500 lower steering race removal tool
Wingdings showed how he made his, which is a bit more elegant than mine: How to make your own steering head bearing removal tool and How to make your own steering yoke bottom bearing pulling tool
If you look at my article How to replace your steering head bearings starting at step 73, you'll see how I built mine - it wasn't too difficult, a cheap chisel, a file, and a propane torch is all you really need.
If you look at my article How to replace your steering head bearings starting at step 73, you'll see how I built mine - it wasn't too difficult, a cheap chisel, a file, and a propane torch is all you really need.