Has anyone replaced the start/reverse switch assembly? I just had the trike painted and i'm in the process of reassembling it and the start switch doesn't engage all the time and reverse isn't working. I've already purchased the assembly and from what I can tell the cable runs down the handlebars around the handlebar neck then down under the right vents. From there i can't see where it ends, I've removed the air cleaner assembly but still can't see where it ties into the wiring harness. If anyone has any ideas or suggestions I'd appreciate it.
Thanks
Start/Reverse Switch Assembly replacemnet
- Erdeniz Umman
- Posts: 965
- Joined: Tue Oct 27, 2015 12:33 am
- Location: Ankara Turkey
- Motorcycle: 2000 GL1500SE
Re: Start/Reverse Switch Assembly replacemnet
The connectors are over the right and left fans.
- JPochron
- Posts: 125
- Joined: Sun Nov 29, 2015 9:44 pm
- Location: Alvin, TX 77511
- Motorcycle: 1995 Honda Goldwing GL1500 Aspencade
Re: Start/Reverse Switch Assembly replacemnet
after a great deal of effort i found where they plug in. Idiotic in my opinion they run the cable down the handle bar then down around the neck under the duct and below the right pocket. waste of time and cable they could have taken a shorter path. now i have to put it back together. thanks for the repsonse