Pin-out for clock connector GL1500A


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
User avatar
CaptKen
Posts: 12
Joined: Tue Jan 01, 2019 2:27 pm
Location: Conway, SC
Motorcycle: 2007 GL1800A w/ Hennese trike conversion
Contact:

Pin-out for clock connector GL1500A

Post by CaptKen »



My G1500a trike has lost ability to hold time after engine shutdown. Key sw on and the clock works fine, just has to be reset. Does any one know where I can find a pin diagram of the display module connector?


Ken Peterson
Conway, SC 29526
kenpeterson0961@gmail.com
2007 Wing w/Hennessey Trike Conversion
User avatar
LSlinger
Posts: 3
Joined: Mon Mar 25, 2019 1:40 pm
Location: Northfield, Minnesota
Motorcycle: 2000 GL1500SE

Re: Pin-out for clock connector GL1500A

Post by LSlinger »

If you get an answer to this I'd like to know what it is, because every time I start my bike it's always 2:30. I can set the current time and as long as the key is turned on the clock works just fine but as soon as you turn off the key and turn the key back on it 2:30 again. Just like Ground Hogs Day!
User avatar
MikeB
Posts: 3681
Joined: Fri Dec 04, 2009 12:54 pm
Location: Tacoma, WA
Motorcycle: 1998 - GL1500 Aspencade
186K Miles
2017 - GL1800 Audio Comfort
20K Miles
Contact:

Re: Pin-out for clock connector GL1500A

Post by MikeB »

Read through this post. There is a fuse you need to check.
viewtopic.php?f=6&t=47977
MikeB
1998 - GL1500 w/184,500 miles ~ 2017 - GL1800 w/13000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA
Post Reply