Had to **** up a screw today when I took off my clutch fluid cover to add fluid to bleed clutch slave cylinder after rebuilding it.
Anybody know the correct size of the screw, so I can try to get one?
Thanks in advance.
Clutch fluid cover screw
- bluthundr31
- Posts: 573
- Joined: Tue Jul 11, 2017 11:43 pm
- Location: Morgan Hill, CA.
- Motorcycle: 1991 GL1500 Interstate (Cinnamon Beige)
Re: Clutch fluid cover screw
Any good hardware store (Lowe's, Home Depot, Ace Hdwre) will have a "board" with metric sizing for you to match that screw. You're gonna probably go to the hardware store to get a replacement anyway, just take it in and match it.
HELPFUL HINT: replace both screws with a flat head HEX (allen) head screw and you won't strip anymore of em, , , they'll last til you sell the bike.
HELPFUL HINT: replace both screws with a flat head HEX (allen) head screw and you won't strip anymore of em, , , they'll last til you sell the bike.
- rooferx
- Posts: 137
- Joined: Wed Jul 25, 2012 7:56 pm
- Location: pasadena,,MD
- Motorcycle: 85 interstate,, the 15 is gone sadface
Re: Clutch fluid cover screw
Cycle Max has them...
- MikeB
- Posts: 3159
- Joined: Fri Dec 04, 2009 12:54 pm
- Location: Tacoma, WA
- Motorcycle: 1998 - GL1500 Aspencade
184K Miles
2017 - GL1800 Audio Comfort
14K Miles - Contact:
Re: Clutch fluid cover screw
4 x .7 mm x 7 mm long, Flathead JIS or Phillips.
MikeB
1998 - GL1500 w/184,500 miles ~ 2017 - GL1800 w/13000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA
1998 - GL1500 w/184,500 miles ~ 2017 - GL1800 w/13000 miles
USAF Avionics Communications Tech - 1968 - 1986 / Flight Engineer C-130E - C-141B - 1986 - 1992. Retired
Industrial Maintenance Tech - 1992 - 2014
Retired in Tacoma, WA