Where to tap into brake light circuit


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
chuckcal
Posts: 8
Joined: Sun Oct 13, 2019 6:25 pm
Location: Barrington, IL
Motorcycle: 1990 GL1500SE

Where to tap into brake light circuit

Post by chuckcal »



Hoping someone can save me some time, where can I find the easiest place to tap into the brake light circuit? just want to get the signal to an LED light controller.
Under the seat preferable, but I can find it in the trunk if that is best.

1990 GL1500 SE

Thanks.



User avatar
dingdong
Posts: 3932
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500A
2004 NRX1800 Rune SOLD

Re: Where to tap into brake light circuit

Post by dingdong »

Under the seat on left side there is a large connector c10. The connector is encased in a plastic housing. In that 25 pin connector is a Green with red stripe wire. That G/r wire feeds all the brake lights.

chuckcal
Posts: 8
Joined: Sun Oct 13, 2019 6:25 pm
Location: Barrington, IL
Motorcycle: 1990 GL1500SE

Re: Where to tap into brake light circuit

Post by chuckcal »

That's what I needed. THANKS

Post Reply