Engine is in - too many tubes?

Bygdetroll · Post by **Bygdetroll** » Tue May 12, 2020 2:56 pm

A cry from Spain.
Can anyone Help me with some drawings or schematics for different tubes at the engine on a 1993 GL1500 Aspencade?
My fault - I was too arrogant - not thorrour enough and now the engin is monted in the Frame.
Right side behind the sylinders, two rubbertubes are stikking out, different size. Probably from on top of the engine somewhere.
In front a metal T-tube has one tube from thermostathousing and one from water pump, but what should be on the third one?
I have Taken fotos, but do not know how to post them here.
I hope it is possible to fix without take the Engine out again?
Arnie

Erdeniz Umman · Post by **Erdeniz Umman** » Wed May 13, 2020 3:39 am

There should be color strips on the tubes. What color are they?
Here is the diagram in the service manual.

Bygdetroll · Post by **Bygdetroll** » Sat May 23, 2020 8:08 am

Thanks so far!
Still I have som problems, and still i do not know how to put pictures on. Can anyone tell me how to?

Elmobile · Post by **Elmobile** » Sat May 23, 2020 10:06 am

Here is the link to the instruction...
viewtopic.php?f=3&t=5647&start=125

Cheers

Engine is in - too many tubes?

Engine is in - too many tubes?

Re: Engine is in - too many tubes?

Re: Engine is in - too many tubes?

Re: Engine is in - too many tubes?