Oil Seal on the gear shift shaft
Oil Seal on the gear shift shaft
Hi can someone tell me how to get the gear shift shaft off i got the 10mm bolt out but can't get the shaft off to replace oil seal this is on a 1996 gw se 1500
- dingdong
- Posts: 4183
- Joined: Thu Apr 08, 2010 8:35 am
- Location: Oklahoma City
- Motorcycle: 1976 gl1000
1993 gl1500A
2004 NRX1800 Rune SOLD
Re: Oil Seal on the gear shift shaft
Look in the how to articles. viewtopic.php?f=14&t=46601&sid=5ca6e665 ... e0db131f66
- wezx
- Posts: 123
- Joined: Mon Jul 16, 2018 2:16 am
- Location: Munroe Falls, OH - United States
- Motorcycle: 1993 GL1500A
Re: Oil Seal on the gear shift shaft
Yes, and note in the tutorial where they grind a bit off the lever to allow it to go on and off easier...makes a big difference.
Re: Oil Seal on the gear shift shaft
Thanks guys i went to the post and i got a lot out of it . thanks and yes i did use my cut off grinder on the shift shaft tomorrow will put seal in and back to together and on the road again that's way i love is site !! THANKS AGAIN
-
- Posts: 232
- Joined: Sat Jul 08, 2017 3:52 am
- Location: Mt. Sterling Kentucky
- Motorcycle: 1999 Honda GoldWing 1500se/2012 Hannigan Trike, 1953 Panhead, 1973 Electra Glide sold
Re: Oil Seal on the gear shift shaft
Do you have a shifter shaft brace on it? It will help to prevent the seal from going bad again.
- wezx
- Posts: 123
- Joined: Mon Jul 16, 2018 2:16 am
- Location: Munroe Falls, OH - United States
- Motorcycle: 1993 GL1500A
Re: Oil Seal on the gear shift shaft
Here’s the link to the shifter brace...money well spent.
https://cyclemax.com/inc/sdetail/gl1500 ... 102/200181
https://cyclemax.com/inc/sdetail/gl1500 ... 102/200181