Replacement Clutch Hose - How long?


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
User avatar
XJSRider
Posts: 160
Joined: Fri Jul 24, 2020 2:45 pm
Location: New Britain, CT
Motorcycle: 1993 GL1500A

Replacement Clutch Hose - How long?

Post by XJSRider »



I'm looking at replacing all brake lines with a kit from galfer. It is a bit cheaper than Randakk's kit and I've used them before on different bikes and been happy with the quality.

It is funny that all the kits are missing an intermediary hose for the rear. The pathway is MASTER to HARD PIPE to HOSE to HARD PIPE to HOSE to CALIPER and the kits only give you the last "HOSE" section. Randakk sells the first HOSE section separately so I will buy that from him.

I figured I'd do the clutch too. I need to order that brake line from Randakk and he does sell a clutch line but he wants 100 bucks for it which is too much for what it is. Galfer will sell a clutch line from a Valkyrie for $55. They say it is 63" long. Part number on fiche is different from GL1500 clutch line (compared to Valkyrie) so I don't know if that is because of preformed bends or what.

Any idea how long a standard braided hose would need to be to get from master to slave on the gl1500?



User avatar
XJSRider
Posts: 160
Joined: Fri Jul 24, 2020 2:45 pm
Location: New Britain, CT
Motorcycle: 1993 GL1500A

Re: Replacement Clutch Hose - How long?

Post by XJSRider »

PS obvious answer here is to take it off and measure, but I am ordering brake lines tonight and thought I might get lucky and be able to piggyback on shipping

User avatar
Gabriel72
Posts: 13
Joined: Tue Aug 15, 2017 7:49 am
Location: Lodz,Poland
Motorcycle: 1995 GL 1500 SE Canadian Edition

Re: Replacement Clutch Hose - How long?

Post by Gabriel72 »

Hi,
I also want to replace the clutch hose and already even bought the Randakk's one a two years ago.
There is description on it that the replacement is not running the same way as the original.
Probably it is shorter and not bended for sure and it is much thinner than the OEM hose.
I rebuilded the master and slave cylinders, bleeded the system many times but I am still not happy with that, especially when the engine is warm.
I replaced the bushing as well.
So next step and probably the last already is the replacement of the the clutch hose. I will do this very soon.
BTW, There is still the new Honda OEM hose available, 180 bucks around.

User avatar
wingdings
Posts: 467
Joined: Mon Feb 10, 2014 12:48 pm
Location: mells , England, United Kingdom
Motorcycle: Honda Goldwing gl 1989

Re: Replacement Clutch Hose - How long?

Post by wingdings »

Look on ebay !! - eBay item number:292328906599 or click on this link -https://wezmoto.com/
Call or Email
01392 690770
info@wezmoto.com

:D :D :D :D :D 10mm * 39cm Braided Steel Brake Clutch Oil Hose Tube Line Pipe Banjo Pipe :D :D :D

User avatar
Gabriel72
Posts: 13
Joined: Tue Aug 15, 2017 7:49 am
Location: Lodz,Poland
Motorcycle: 1995 GL 1500 SE Canadian Edition

Re: Replacement Clutch Hose - How long?

Post by Gabriel72 »

Update:

Original OEM hose from Partzilla is around 40 bucks.

User avatar
newday777
Posts: 1883
Joined: Tue Jan 11, 2011 5:21 pm
Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
Motorcycle: 2008 Cabernet Red. Level 4

1983 GL1100A Wineberry 36,000 miles

1975 CB750 K5 Planet Blue 7,800 miles

1976 CB750 K6 Anterris Red 25,000 miles

Past rides
1999A Restored from PO neglect & sold at 19,000 miles

1999SE Totaled by cager at 105,000 miles

Re: Replacement Clutch Hose - How long?

Post by newday777 »

XJSRider wrote:
Tue Aug 04, 2020 5:21 pm
I'm looking at replacing all brake lines with a kit from galfer. It is a bit cheaper than Randakk's kit and I've used them before on different bikes and been happy with the quality.

It is funny that all the kits are missing an intermediary hose for the rear. The pathway is MASTER to HARD PIPE to HOSE to HARD PIPE to HOSE to CALIPER and the kits only give you the last "HOSE" section. Randakk sells the first HOSE section separately so I will buy that from him.

I figured I'd do the clutch too. I need to order that brake line from Randakk and he does sell a clutch line but he wants 100 bucks for it which is too much for what it is. Galfer will sell a clutch line from a Valkyrie for $55. They say it is 63" long. Part number on fiche is different from GL1500 clutch line (compared to Valkyrie) so I don't know if that is because of preformed bends or what.

Any idea how long a standard braided hose would need to be to get from master to slave on the gl1500?
Did you get it figured out/do anything on it?
It's not good to leave a post unfinished.... Others will read this later in time using a search tool looking for the answer wanting to do their clutch line replacement.

User avatar
newday777
Posts: 1883
Joined: Tue Jan 11, 2011 5:21 pm
Location: Milford NH summer/fall & Oceanside, CA winters(N San Diego) with lots of miles riden between
Motorcycle: 2008 Cabernet Red. Level 4

1983 GL1100A Wineberry 36,000 miles

1975 CB750 K5 Planet Blue 7,800 miles

1976 CB750 K6 Anterris Red 25,000 miles

Past rides
1999A Restored from PO neglect & sold at 19,000 miles

1999SE Totaled by cager at 105,000 miles

Re: Replacement Clutch Hose - How long?

Post by newday777 »

Doing a search I see someone posted 72" is more likely on the goldwing.............
Measure with a string along the stock hose to be sure before you order though.
Attachments



User avatar
XJSRider
Posts: 160
Joined: Fri Jul 24, 2020 2:45 pm
Location: New Britain, CT
Motorcycle: 1993 GL1500A

Re: Replacement Clutch Hose - How long?

Post by XJSRider »

The update was I used Randakk's line, it was longer than needed to be matching routing of stock hose (including removing the solid pipe parts). My advice is mock it up with a string and order one special.



Post Reply