Replacement MPH/RPM Gauge Faces for '99 Aspencade

[zeoran]

I would like to replace the white gauges on my 99 Aspencade. Anytime around dawn or dusk they become literally unreadable. I'm presuming that if I can find the black gauge faces themselves, I should be able to just swap them out and be good to go. I'll probably swap all my internal bulbs for LED's at the same time. But I can't seem to find where to get the replacement gauge faces themselves. Any ideas?

God bless,

~Mark

[wingdings]

Hi - Mark !! - Jon here !! You need a old set of clocks from a old wing there - Have a look at these how to articles it will show you what's involved to do the job and while your at it you may as well put Led bulbs in the dash too !! - Yes ?? .

viewtopic.php?f=14&t=10998

viewtopic.php?f=14&t=36120

viewtopic.php?f=14&t=40659

viewtopic.php?f=14&t=851

Hope this helps !!

[WingAdmin]

Hi - Mark !! - Jon here !! You need a old set of clocks from a old wing there - Have a look at these how to articles it will show you what's involved to do the job and while your at it you may as well put Led bulbs in the dash too !! - Yes ?? .

Or a newer wing! They switched back to dark faced gauges for the last model year, 2000.

[wingdings]

True !! - Wing admin - And spot on as always !!! .

[zeoran]

Is there a good location where I can get just the black faces for the gauges on the 2000 wing? All the places I've looked so far only sell the entire instrument panel and it's expensive. I only need the faces themselves.

God bless,

~Mark

[WingAdmin]

Is there a good location where I can get just the black faces for the gauges on the 2000 wing? All the places I've looked so far only sell the entire instrument panel and it's expensive. I only need the faces themselves.

God bless,

~Mark

I don't think those were ever made available as parts - only the entire instrument cluster.

[AZgl1800]

Is there a good location where I can get just the black faces for the gauges on the 2000 wing? All the places I've looked so far only sell the entire instrument panel and it's expensive. I only need the faces themselves.

God bless,

~Mark

I don't think those were ever made available as parts - only the entire instrument cluster.

do what I did for the '98SE, those WHITE GAUGES are the worst idea ever on a bike or truck. I had a '98 Dodge truck with that fancy idea of White Gauges.... Horrible mistake, had the same exact problem with it also. in Twilight, they are invisible, under Vapor glare lights, they are Invisible.

So, I found a set of black gauges on eBay and pulled the face plates off to use on my gauges.

[wingdings]

Mark - Try this web site there - https://www.facebook.com/groups/1577635 ... 1423636113 Ask - Jay smith on there he sells all the wing stuff on there fella and ships it too or you can call and pick it up yourself Mark - Funny thing is i have a spare set of black faced clocks that i bought mainly for LCD display that was still good in it - However its a bit to far to ship it to you there and import costs on top too

Or try here - too -

122080066_10226134756781766_5809104176003356282_o.jpg

Hope this helps Mark fella ..

[zeoran]

Thank you for the suggestion!

I've contacted Jay and not only does he have a set, he's willing to trade me for my white gauges... (must be something wrong with him)

God bless,

~Mark

[wingdings]

Glad it all worked out for you there Mark fella - " That's what I love about this site - Mark fellow Goldwing owners chipping in when the chips are down in the true sprite of the site too !!

Lastly - Mark - Don't forget to use the how to articles on this too fella - It will save you both time and a world of pain too fella ..