Tube 17465-MN5-000 alternative

[Toogzweire]

Hi,

When renewing the sub-air filter I noticed tube 17465-MN5-000 had a nick and a very small hole in it. I have been scrolling the internet, but this item seems to be EOL.
Do any of you guys know of an alternative?

See 17465-MN5-000

T

[WingAdmin]

It's only handling unpressurized air, so pretty much anything will work. I'd just buy a piece of generic hose (I think it's 5.5mm? Might want to measure it to be sure) along with a 90 degree elbow. Cut the hose in two, stick the elbow in between, and fit it in place.

[Toogzweire]

Thanks for the tip!
I thought the tube was pressurised...

T

[WingAdmin]

Thanks for the tip!
I thought the tube was pressurised...

T

Nope! Air gets drawn in through the filter, then through that hose and into the PAIR solenoid valves. So the pressure in that hose is the same as ambient air pressure - the only thing separating the air in that hose from the outside world is the filter media (a sponge).