Coolant Hose Routing


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
fxrstew
Posts: 5
Joined: Thu Sep 24, 2020 9:38 pm
Location: United States
Motorcycle: 1993 Honda Goldwing 1500 GL

Coolant Hose Routing

Post by fxrstew »



On my 1993 GL1500, two of the smaller coolant hoses connected to water pump are leaking and looking really crusty. Therefore, I want to replace both hoses, but I am not sure where the opposite ends of hoses are connected. My question is do both hoses run directly to the carburetors, or does each hose connect to a three way joint? Any advice would be much appreciated.


User avatar
Snowmoer
Posts: 319
Joined: Fri Jan 25, 2013 12:23 pm
Location: Cedar City UT
Motorcycle: 2012 GL 1800
1977 GL 1000
2012 KLR 650

Re: Coolant Hose Routing

Post by Snowmoer »

Here is a parts fiche so you can see where the hoses go. It has almost 10 years since I replaced all the cooling hoses on my 1500. I just don't remember where they went to.

https://www.rockymountainatvmc.com/oem-schematic/6
Post Reply