2000 gl1500se link cover boot

[mharnack]

2000 honda goldwing gl1500se link cover boot. (It's the rubber boot under passenger foot rest)
Where can I find replacement
Thank you

[MikeB]

2000 honda goldwing gl1500 link cover boot.
Where can I find replacement
Thank you

I am sorry, I do not understand the question. Which link are you talking about?

[Charlie1Horse]

partzilla.com If you are describing the U-Joint boot you can find it on partzilla.com. Part number '52104-MN5-000', $28.97
Russell

If I don't do Facebook or Twitter, do I still have to do Social Media Distancing???

[tfdeputydawg]

After a lengthy search for the link cover, I believe about your only hope is to start contacting motorcycle wreaking yards to locate this part.

[mharnack]

I believe so too any suggestions on salvage yards?

[MikeB]

Can you please tell me what link you're talking about? I have no frame of reference.

[mharnack]

It's the rubber boot under passenger foot rest

[terryt]

Is this what your after

https://www.ebay.co.uk/itm/Honda-GL-150 ... %3A2334524

[MikeB]

It's the rubber boot under passenger foot rest

Okay, got you. Now that I know what you are talking about I can only pass my condolences.
You probably know this but they are no longer available new.
As tfdeputydawg says, salvage yards and online aution site are your only avenue to locate them.

[tfdeputydawg]

Here's a start:
https://www.google.com/search?q=motorcy ... e&ie=UTF-8
Google motorcycle salvage yards

[Rambozo]

If you can't find any, you can also look at way and cable covers for machine tools. They are the same type of rubber bellows, and are made in a wide variety of sizes, so you might be able to fashion some suitable replacements.

[mharnack]

Yes. I have been racking my brain trying to think of what else I could use
Thank you

[Erdeniz Umman]

I think you are looking for the parts #26 and 50 in the following link.
#50 Left one is in stocks.
https://www.partzilla.com/catalog/honda ... ng-se/step

[Rambozo]

Ha!
After seeing the right side was unavailable, I didn't even bother to scroll down to check the left.

[mharnack]

Thanks you. For your help

[FM-USA]

Thanks you. For your help

IF you haven't found one yet, my suggestion would be to wrapping a black plastic bag around it. Extend the foot rest to it's full height first then wrap.
If it gets pinched anywhere it's pliable enough to not hang anything from working.

.

.

[mharnack]

I found them on partszilla they had both side very expensive
Thank you

[AZgl1800]

I found them on partszilla they had both side very expensive
Thank you

but at least they are still OEM new old stock.

https://www.partzilla.com/catalog/honda ... e/swingarm

Item #8