Need some help. trying to identify the manufacturer of my trike conversion. The prior owner is no longer around and I need to do some work on the wheel bearings. Hoping to get info on type and size from conversion company. Not the worst problem but would be helpful. That way I might be able to also get an owners manual for the conversion. Appreciate any help you guys can give.
2000 GL1500 SE Trike
identification help
-
Rambozo
- Posts: 1176
- Joined: Sun Apr 01, 2018 8:36 pm
- Location: Disneyland
- Motorcycle: 1992 GL1500 Aspencade
Ducati Monster
Re: identification help
Another option is to just pull the bearings/seals and take them into a bearing house and they will match them up for you.
-
daash
- Posts: 42
- Joined: Thu Oct 08, 2020 3:52 pm
- Location: Kissimmee, FL USA
- Motorcycle: 2000 GL 1500 SE Trike
Re: identification help
I was able to determine the conversion is done by DFT (darn fine trike). As we got into the bearings, also determined the u-joints are ready for replacement. Thanks for the suggestion and that is basically what we are doing.