reverse switch location
-
jdn40
- Posts: 51
- Joined: Thu Sep 24, 2020 5:49 am
- Location: Chester county , Pennsylvania
- Motorcycle: 1996 GL1500 Aspencade Trike
reverse switch location
I'm adding a reverse camera . it needs to be wired to the reverse switch ( looking for a blue/white wire ) where is the switch ? I've looked thru the DIY section and didn't see anything . normally I wouldn't use a camera but i have a trike .
-
Swagonmaster
- Posts: 262
- Joined: Sun Apr 16, 2017 3:30 pm
- Location: Stokesdale, NC
- Motorcycle: 1990 gl1500 SE
Re: reverse switch location
It's just to the rear of the neutral lever, is actuated by the lever.
Try to learn from the mistakes of others..... you won't live long enough to make them all yourself!
-
Great_adVENTURE
- Posts: 82
- Joined: Thu Jun 18, 2020 7:37 am
- Location: Highlands NJ
- Motorcycle: 1995 Honda GL1500 SE
2020 Can-Am Ryker 600
2016 Harley Davidson SPORTSTER 72
Re: reverse switch location
Would love to see some pictures of it when its all done.
If you never did you should. These things are fun. And fun is good. ~Dr.Seuss
-
WingAdmin
- Site Admin
- Posts: 22061
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer
Re: reverse switch location
You can see it here: viewtopic.php?t=32117
There's actually two - one on either side. One is activated directly by the lever, the other is a plunger switch activated by mechanism in the reverse gearing. The easier one to locate and use is the one on the left side, activated by the lever.
There's actually two - one on either side. One is activated directly by the lever, the other is a plunger switch activated by mechanism in the reverse gearing. The easier one to locate and use is the one on the left side, activated by the lever.