Highway Peg ID, 2000 GL1500


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
mljudge
Posts: 6
Joined: Tue Jul 27, 2021 7:44 pm
Location: Burlington, MA
Motorcycle: 2000 GL1500 SE

Highway Peg ID, 2000 GL1500

Post by mljudge »



Hi all, below is a picture of the right highway peg on my newly-acquired 2000 GL1500. The peg assembly threads in to the stud coming out of the square mount I do not have the left side peg, as was wondering if anyone had this same setup or knew the manufacturer of the mount as I can't seem to find one similar. Thanks for your help! - Mike
Attachments




Crusty1
Posts: 64
Joined: Sat Jun 06, 2020 10:57 am
Location: Kansas
Motorcycle: 2000 GL1500SE
2007 ST1300A ABS

Re: Highway Peg ID, 2000 GL1500

Post by Crusty1 »

Its made by Kyriakyn. I believe that model is discontinued.
mljudge
Posts: 6
Joined: Tue Jul 27, 2021 7:44 pm
Location: Burlington, MA
Motorcycle: 2000 GL1500 SE

Re: Highway Peg ID, 2000 GL1500

Post by mljudge »

It figures! Maybe I'll post on the Wanted side and see if anyone has one. Thanks for the reply!
Crusty1
Posts: 64
Joined: Sat Jun 06, 2020 10:57 am
Location: Kansas
Motorcycle: 2000 GL1500SE
2007 ST1300A ABS

Re: Highway Peg ID, 2000 GL1500

Post by Crusty1 »

This style was also used early on for the 1800 as well. Kyriakyn changed the design and made an upgrade kit for the 1800. I do not know if the newer style will fit on the 1500. Their web site did not list one for the 1500.


Post Reply