Small Water Pump Hoses?
- inky86
- Posts: 4
- Joined: Sat Dec 04, 2021 9:34 pm
- Location: winter haven florida
- Motorcycle: 1997 gl1500 se trike
Small Water Pump Hoses?
I just finished doing a timing belt change and there were 2 small hoses that went across the front cam belt cover to the water pump, I had a very hard time getting these hoses off and when I reinstalled everything, I noticed the one of the hoses was leaking by the clamp, I don't want to drive it with these weak hoses. Anyone change these and know where they go to and how hard they are to change up to where ever they go? I thought about putting in a splice but noticed the inside ID would be reduced with an adapter so not a good idea there.
- WingAdmin
- Site Admin
- Posts: 23398
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (sold)
1998 XV250 Virago (sold)
2012 Suzuki Burgman 400 (wife's!)
2007 Aspen Sentry Trailer - Contact:
Re: Small Water Pump Hoses?
Those small hoses are not too long, relatively easy to replace, and unlike the split high-pressure hose that goes to the radiator, they are also relatively cheap.
Hose 15 part number is: 19516-MY4-000
Hose 18 part number is: 19521-MY4-000
Both are still available, and are around $11 each.
You might want to also replace the clamps, 91405-PD1-004 at around $9 each.
Hose 15 part number is: 19516-MY4-000
Hose 18 part number is: 19521-MY4-000
Both are still available, and are around $11 each.
You might want to also replace the clamps, 91405-PD1-004 at around $9 each.
- inky86
- Posts: 4
- Joined: Sat Dec 04, 2021 9:34 pm
- Location: winter haven florida
- Motorcycle: 1997 gl1500 se trike
Re: Small Water Pump Hoses?
Thank you so much, exactly what I have been searching for!