Floorboards gotta come off!!

Engel6264 · Post by **Engel6264** » Wed Mar 09, 2022 11:33 am

These have got to come off!! The allen head is tighter than ,, .... you finish that line..
I think that I stripped the left side head. Have used penetrating spray have tried a visegrip. Just have given up.

Give me a idea that I can use.

Thanks
Angel

Rambozo · Post by **Rambozo** » Wed Mar 09, 2022 2:04 pm

Heat, shock. If they are cheap fasteners, good luck. You might have to just drill them out.

blupupher · Post by **blupupher** » Wed Mar 09, 2022 3:10 pm

I was going to say heat as well.
Do you know if any lock tite was used on install?

gford · Post by **gford** » Wed Mar 09, 2022 4:08 pm

if red Loctite was used heat is the only thing that will get them off.

Engel6264 · Post by **Engel6264** » Thu Mar 10, 2022 11:24 am

blupupher wrote: ↑Wed Mar 09, 2022 3:10 pm I was going to say heat as well.
Do you know if any lock tite was used on install?

Heat is what I will have to use. I am the third person owning this bike and don't know what was put on the threads.

Engel6264 · Post by **Engel6264** » Thu Mar 10, 2022 11:15 pm

gford wrote: ↑Wed Mar 09, 2022 4:08 pm if red Loctite was used heat is the only thing that will get them off.

They are finally off. We did have to use heat. And it was the red lock right that was on them. Wow! Was that fun... NOT...!

Solo So Long · Post by **Solo So Long** » Thu Mar 10, 2022 11:24 pm

The FO just wanted to make sure that anyone who wanted to go back to pegs was SERIOUS about it.

Floorboards gotta come off!!

Floorboards gotta come off!!

Re: Floorboards gotta come off!!

Re: Floorboards gotta come off!!

Re: Floorboards gotta come off!!

Re: Floorboards gotta come off!!

Re: Floorboards gotta come off!!

Re: Floorboards gotta come off!!