Need shifter lever

[PowerSlave]

I was finishing up installing the shifter brace on my '96 GL1500, after installing (with new shifter seal) it would not shift up except into neutral. I started taking it back apart to see if there was some interference I did not see before and as I was trying to open up the pinch opening to get the shifter off, it broke in two. So needless to say I need a shifter lever, does anyone know if they are still available new? Or a good replacement? I can get it welded up, but its life span will be unknown after that, don't want to loose my shifter going down the highway at all.

Thanks in advanced.

[Rambozo]

Part number 24710-MT2-000
https://www.partzilla.com/product/honda ... 6ef4578c39

[PowerSlave]

Part number 24710-MT2-000
https://www.partzilla.com/product/honda ... 6ef4578c39

Thanks for the link.

I'm trying to find a similar site in Canada where the shipping isn't $20 USD.

[Rambozo]

I didn't notice your location. I actually saw one on ebay and didn't include it since it was in Canada.
https://www.ebay.ca/itm/304442298580
You can also just get your local Honda dealer to order it for you or if you're lucky they have a dusty one still on the shelf.

[blupupher]

I just got one off ebay when I got rid of my floorboards/ Heel/toe shifter and have had no issues with it.

[PowerSlave]

Called the local Honda dealer, I will have a new one in a week for 85 Canadian dollars.

Thanks everyone for your replies and help.