GL1500 Pilot screw tool

Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
User avatar
Lars Magnuson
Posts: 1
Joined: Sat Dec 18, 2021 2:37 am
Location: Sverige
Motorcycle: 1987 GL1200 Interstate, 1998 GL1500 SE

GL1500 Pilot screw tool

Post by Lars Magnuson »

As I an new to the forum I would like to introduce myself:
Located in Stockholm, Sweden so please excuse my English.
Been riding for 45 years know on different bikes. Wrenching
is my hobby and I take Goldwings that have been sitting and put
them back on the road.

I am not used to posting on forums so if I am doing something wrong please excuse me.
I am currently working on a GL1500SE 1998 and need to adjust the air mixture after
overhauling my carbs including new pilot screws.
The tool needed (07MMA-MT3010 or 07LMA-MT8010) is as you know obsolete and very
expensive if you find it.
However in the manual for VT750C2 2007-2009 Honda suggest that if you do not have
the tool 07KMA-MS60102 you can use 07MMA-MT3010. Does anyone know if
it works the other way around?

Best Regards
Lars in Sweden

User avatar
Posts: 1577
Joined: Wed Nov 10, 2010 8:09 pm
Location: Glastonbury,CT
Motorcycle: 1988 GL1500

Re: GL1500 Pilot screw tool

Post by ct1500 »

This "D" bit will work with a bit of ingenuity for access or the whole tool. ... B003CMWC4U
Local and need repair help with your 1500, Valkyrie or ST please click contact
Nothing leaves my shop till its' perfect
This is what I do
Post Reply