i'm rebuilding my 1999 se secondary clutch and need honda p/n.s like piston, seals , or where can i download a parts pdf. just had a smithfield kit installed
by a shop. lost clutch completely as i drove in my driveway. (4 miles away) . & my manuslas are in the shop & he is closed for a week.
i'd ;ike to get thje parts on order but can't find a kit with a piston.
need p/n's for slave clutch
-
brownfoxx1
- Posts: 23
- Joined: Fri Feb 09, 2018 2:13 pm
- Location: peru,in,usa
- Motorcycle: '1993 gl-1500 goldwing with road smith trike kit . plus 3 harleys, and a bmw
-
blupupher
- Posts: 700
- Joined: Sun May 17, 2020 5:47 pm
- Location: Katy, Republic of Texas
- Motorcycle: 2013 BMW K1600GT
Re: need p/n's for slave clutch
Look in this thread, all P/N and a how to are there.
viewtopic.php?f=14&t=64137
You need to take a close look at your clutch master, because if the slave is bad, the master may be as well, they both get cycled the same number of times and are in contact with the same fluid.
When I did my slave, I found the master was also leaking a little (no drips, but noted a little corrosion and the lever, so changed the piston and seals on it at the same time).
viewtopic.php?f=14&t=64137
You need to take a close look at your clutch master, because if the slave is bad, the master may be as well, they both get cycled the same number of times and are in contact with the same fluid.
When I did my slave, I found the master was also leaking a little (no drips, but noted a little corrosion and the lever, so changed the piston and seals on it at the same time).
Current ride: 2013 BMW K1600GT
Former rides: 2002 GL1800A, 2001 CB750, 1994 GL1500 SE, 1994 VT1100C , 1984 VF500F, 1982 CB750C, 1982 GS250T, 1981 CB900C, 1978 CB125s, 1976 TS185
Former rides: 2002 GL1800A, 2001 CB750, 1994 GL1500 SE, 1994 VT1100C , 1984 VF500F, 1982 CB750C, 1982 GS250T, 1981 CB900C, 1978 CB125s, 1976 TS185