Neutral Safety Switch on Clutch

[BIMWing]

Does anyone know the part number for the Neutral Safety Switch on the clutch assembly for my 95 GL1500, and also any suggestions/tips on how to replace it?
Thanks..

[bbrackett]

sorry the switch pn you can go on many honda motorcycle websites n find it there easily

for starting 35335-MG9-951
cruise 35330-MB0-003

when i replaced mine, the issue I had was the 1/4” female connector was broken

[Crusty1]

I believe it’s only sold with the clutch master cylinder. It is actually 2 micro switches (4 wires) one to interrupt the starter and one to cancel the cruise. They don’t usually fail but the grease hardens over time and or the contacts get dirty. I have fixed many of these by flushing with good contact cleaner. Never had to replace one.

[Rambozo]

sorry the switch pn you can go on many honda motorcycle websites n find it there easily

for starting 35335-MG9-951
cruise 35330-MB0-003

when i replaced mine, the issue I had was the 1/4” female connector was broken

I think you got those backwards.

[bbrackett]

yup, got them backwards, taquila
and yes, you can buy them separately, still available from Honda
I bought direct from a local honda dealer

the nubs on the switches where they contact the lever do wear down, part of the reason why I replace mine

[WingAdmin]

Cyclemax keeps them in stock:

Clutch Start Switch (H35330-MB0-003)

Clutch Cruise Switch (H35335-MG9-951)