Installing 1500 spoiler brake light. Need wire routing info please.


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
Quick Cal
Posts: 110
Joined: Mon Mar 23, 2015 3:24 pm
Location: Mid West
Motorcycle: 1989 1500 Goldwing

Installing 1500 spoiler brake light. Need wire routing info please.

Post by Quick Cal »



I have the spoiler installed and just need to wire it up. I have read everything I could find on installing the SE spoiler/light on a non SE model. I have all the parts needed and I'm confident I can do it. Especially thanks to DBohrer's great info he provided in this link.

https://www.goldwingfacts.com/threads/s ... st-5982062

Basically I just need to know how to route the wires, and where to mount the control module. I know the module goes behind the left saddle bag. But where. The parts fiche shows a general location for #4. A pic would be great, but might be hard to come up with.

https://www.partzilla.com/catalog/honda ... gine-guard

By looking at pics on ebay I can see how the wire from the light runs through the passenger back rest. But how is it routed from there? Does it go through the plastic thing in the second pic as shown here? Does it go through the hinge area? You might have to blow these pics up.







I need to know how to route that wire where it connects to the module. Any pics or info would be great. Thanks.


Post Reply