"Making" an Aspencade into a SE


Information and questions on GL1500 Goldwings (1988-2000)
Post Reply
User avatar
blupupher
Posts: 543
Joined: Sun May 17, 2020 5:47 pm
Location: Katy, Republic of Texas
Motorcycle: 2002 Goldwing GL1800A
1994 Goldwing GL1500 SE

"Making" an Aspencade into a SE

Post by blupupher »



So I am going to look at a '96 Aspencade tomorrow to replace my messed up '94 SE.

Is there any obstacle that would keep me from taking the parts from my SE and putting them on the Aspencade?

My '94 is white, and '96 is Green.
While the '96 has the main things I want (cruise, onboard air adjustment, reverse), but I don't like the color, and the paint condition is not the greatest.
I figured I could just move over all the plastics from my '94 to the '96 and be good.
Biggest things are the foot warmer/controls, cornering lights, and trunk spoiler.
I am not moving the CB and headset controls.
Not sure if I am moving the radio, the Aspencade radio looks basically the same as mine, plus I don't use it anyway.
Not sure if I will move rear speakers, they are part of the trunk area, but not sure how hard it would be to wire them.
May or may not move the adjustable rear foot rest, depends on how much of a pain it is to do (I never move them anyway).

Was really wanting a '97+ SE so I don't have to worry about the 4th gear shift fork again, but this '96 is cheap, close, has less than 20,000 miles, and supposedly was just worked on to get running again.
Even if not running well, I have a working bike (except for the 4th gear shift fork) that I could pull most all the mechanical parts from if needed.


Last edited by blupupher on Tue Nov 15, 2022 4:13 pm, edited 2 times in total.
1994 Goldwing GL1500 SE
vcdc
Posts: 41
Joined: Mon Jan 09, 2012 9:47 pm
Location: Buckeye Lake, Ohio
Motorcycle: 1995 GL1500 Aspencade

Re: "Making" an Aspencade an SE

Post by vcdc »

I just transitioned a 95 Aspencade to a 2000 SE. I wanted to keep the same Tupperware as I liked the color better. I hit a snag when I went to swap the fairing. The Amphenol plugs in the wiring harnesses were different, most likely because of the CB. I did not want to rewire to make it work, so I decided I would like the 2000 color after all.
User avatar
blupupher
Posts: 543
Joined: Sun May 17, 2020 5:47 pm
Location: Katy, Republic of Texas
Motorcycle: 2002 Goldwing GL1800A
1994 Goldwing GL1500 SE

Re: "Making" an Aspencade an SE

Post by blupupher »

vcdc wrote: Tue Nov 15, 2022 12:59 pm I just transitioned a 95 Aspencade to a 2000 SE. I wanted to keep the same Tupperware as I liked the color better. I hit a snag when I went to swap the fairing. The Amphenol plugs in the wiring harnesses were different, most likely because of the CB. I did not want to rewire to make it work, so I decided I would like the 2000 color after all.
I wonder if that was a year difference thing or a CB thing?

I can live without the CB (never used it in the almost 3 years I have had it), and I am going from a bike with it to one without it, so having a pigtail laying around unused on the fairing will not bug me.
1994 Goldwing GL1500 SE
vcdc
Posts: 41
Joined: Mon Jan 09, 2012 9:47 pm
Location: Buckeye Lake, Ohio
Motorcycle: 1995 GL1500 Aspencade

Re: "Making" an Aspencade an SE

Post by vcdc »

Compare the wiring harness plugs under the right and left cubbies and you will see they are different between A and SE, at least they were in my experience.
User avatar
DenverWinger
Posts: 2279
Joined: Thu Jun 23, 2011 2:20 pm
Location: Denver, CO
Motorcycle: (s)
'80 GL1100 STD Vetter (2005-)
'93 GL1500 Aspencade (2017-)
'83 Trav-Lite Camper (2010-)
Past rides
'72 CL350 (1980-1988) sold
'78 Suzuki GS550 (1985-2005) sold
'77 GL1000 (2002-2006) sold

Re: "Making" an Aspencade into a SE

Post by DenverWinger »

Think you'll find MOST of the SE lighting/accessory connections are built into the Aspy harness.... You might have to look for unused connectors tucked somewhere out of the way.
There are 10 types of people in the world, those that understand binary numbers, and those that don't. :lol:

♫ 99 Little Bugs in the Code, ♪
♪ 99 Bugs in the Code. ♫ :(
♫ Take one down, Patch it around, ♪
♫ 127 Little Bugs in the Code. ♫ ♪ :shock:
~Mark
User avatar
blupupher
Posts: 543
Joined: Sun May 17, 2020 5:47 pm
Location: Katy, Republic of Texas
Motorcycle: 2002 Goldwing GL1800A
1994 Goldwing GL1500 SE

Re: "Making" an Aspencade into a SE

Post by blupupher »

DenverWinger wrote: Tue Nov 15, 2022 6:19 pm Think you'll find MOST of the SE lighting/accessory connections are built into the Aspy harness.... You might have to look for unused connectors tucked somewhere out of the way.
That is kind of what I was thinking, but just was not sure.
Still waiting to hear back from the guy to go take a look at it.
1994 Goldwing GL1500 SE
Solo So Long
Posts: 534
Joined: Thu Mar 26, 2020 4:07 pm
Location: Northern Nevada
Motorcycle: 1999 GL1500 50th Anniversary SE
1989 GL1500 FOR SALE
A pack of Super Cubs
Z50A (pre-headlight)
Formerly (in order):
Honda Super Cub (bought 1968, sold ?)
Kawasaki Coyote (early 1970s)
Honda 350 (mid 1970s)
Kawasaki KZ900-PS (1977)
Honda Super Cubs (various years)
Kawasaki KZ1000C (1978)
Kawasaki KZ1000P (various years, 1980 - 2005)
Honda 360 (1983)
BMW R1150RT-P (2001)
BMW R1200RT-P (various years 2007 - 2018, NEVER AGAIN)

Re: "Making" an Aspencade into a SE

Post by Solo So Long »

Since you plan to remove all "collectability" and have a good riding bike, the wiring harness shouldn't be much of an issue. Just check schematics for both years and figure out what you need to modify.

This might be a good time to go to aftermarket electronics anyhow.

Good luck!


Post Reply