- use of the pergola
- shifter pivot brace
- an aid for the correct placement of screws
96 GL1500SE - New Owner
-
palant
- Posts: 2
- Joined: Tue Jan 10, 2023 6:40 am
- Location: Czech republic
- Motorcycle: 1996 Honda Goldwing 1500 SE
96 GL1500SE - New Owner
Hi, my name is Tony and I'm new here. I'm from Czech Republic. I use google translate so please excuse any mistakes. My wife and I bought a 1996 Goldwing 1500 SE last fall. I have spent many winter evenings reading this forum. I can say that I have not found a better one on the Internet. I especially appreciate your detailed instructions in the DIY section. They helped me with repairs I didn't know how to do. I saved a lot of money that way. For example I replaced the timing belts, disassembled the rear part, lubricated the driveshaft and rear drive. I changed all the oils, including the oil in the front forks (which really needed it), cleaned the brake calipers and much more. I made support for the shifter pivot brace according to the drawing on this forum . Thanks again for this forum, I will keep following it. OK
hi Tony
-
Wingdad75
- Posts: 16
- Joined: Sat Feb 11, 2023 3:58 pm
- Location: Red oak MO USA
- Motorcycle: 1997 GL1500 SE
Re: 96 GL1500SE - New Owner
Welcome! Nice bike. I’m new here also and learning a great deal about our bikes! Looks like you have went through it well! Enjoy! 
