Starter relay A clicks
-
in2it
- Posts: 281
- Joined: Sun Oct 06, 2019 6:09 am
- Location: Waldo,Arkansas
- Motorcycle: 2000 GL 1500 Aspencade
1982 GL1100 (SOLD)
1980 GL1100 Bobber with Vance and Hines Mufflers (SOLD)
Past Rides in my youth
1965 Honda C102 50cc OHV Engine with 3spd Auto-Clutch
1972 CB 350
1975 CB 550 4 with Dunstall headers and mufflers
1978 GL 1000
Starter relay A clicks
My 2000 Asp cranks runs well ... but have no reverse.... the light on the Meter shows it is in Reverse with the R light .. when start button on the handlebars is pressed for reverse ... the Starter Relay A clicks ... the relay right of the battery.... does this mean the relay is bad ... or is this indicating something else is bad ... reverse has always worked before
-
Rambozo
- Posts: 2896
- Joined: Sun Apr 01, 2018 8:36 pm
- Location: Disneyland
- Motorcycle: 1992 GL1500 Aspencade
Ducati Monster
Re: Starter relay A clicks
What about starter relay B? Is it working? Have you checked the two 5A reverse fuses near the battery?
-
in2it
- Posts: 281
- Joined: Sun Oct 06, 2019 6:09 am
- Location: Waldo,Arkansas
- Motorcycle: 2000 GL 1500 Aspencade
1982 GL1100 (SOLD)
1980 GL1100 Bobber with Vance and Hines Mufflers (SOLD)
Past Rides in my youth
1965 Honda C102 50cc OHV Engine with 3spd Auto-Clutch
1972 CB 350
1975 CB 550 4 with Dunstall headers and mufflers
1978 GL 1000
Re: Starter relay A clicks
I havent looked at those two.... I have checked the two fuses in the fusebox and the 65 amp fuse under the seat and relay ... the linkage is where it should be ... but will check the fuses to the left of the battery
-
in2it
- Posts: 281
- Joined: Sun Oct 06, 2019 6:09 am
- Location: Waldo,Arkansas
- Motorcycle: 2000 GL 1500 Aspencade
1982 GL1100 (SOLD)
1980 GL1100 Bobber with Vance and Hines Mufflers (SOLD)
Past Rides in my youth
1965 Honda C102 50cc OHV Engine with 3spd Auto-Clutch
1972 CB 350
1975 CB 550 4 with Dunstall headers and mufflers
1978 GL 1000
Re: Starter relay A clicks
The problem has been solved.... what it was... was the brake lever itself ... I installed the left and right pods on the handlebars ... I also installed new clutch and brake switches at the same time ... the Cruise work one time and then it didnt anymore which was mind boggling.... for some reason the new Honda brake switch had a long throw to engage and disengage ... file a bit on the brake lever to get a clear signal for the cruise to work properly ... everything works and so excited