Firstly, I would be lost without this site, great source of useful information.
I can't find a part number for the thermostat coolant temperature sensor. NOT the one in the radiator but the one in the thermostat housing.
I've tried to attach a picture hope it works.
Thanks everyone
Thermostat coolant temperature sensor part
Re: Thermostat coolant temperature sensor part
Thanks really appreciated.
Re: Thermostat coolant temperature sensor part
Hi Do you know what sealant should be used for the thermo denso unit?
My manual says honda sealant, which isn't really helpful.
Thanks
My manual says honda sealant, which isn't really helpful.
Thanks
- Rambozo
- Posts: 4041
- Joined: Sun Apr 01, 2018 8:36 pm
- Location: Disneyland
- Motorcycle: 1992 GL1500 Aspencade
Ducati Monster
Re: Thermostat coolant temperature sensor part
It's tapered pipe thread, so just about anything will work. It does need to get a ground connection so Teflon tape wouldn't be my first choice, (but it would probably work, too). Loctite has a number of sealers that would do the job, the blue loc n seal even comes pre-applied on some of these. Hylomar, Permatex #2 or #3 or any of their thread sealants. Just about any gasket sealer. Pipe dope, RectorSeal, even a drop of motor oil just to prevent galling. You get the idea.
Re: Thermostat coolant temperature sensor part
Again thank you very much for sharing your knowledge.
Thanks
Thanks